Operation Manual

iDECT Help Line (for UK only): 0845 345 9677 (Local Call rate) 17
Using multi-handset capabilities
If you have an iDect X5i multi-handset system, you already have more
than one handset registered to your base unit. You can register
additional handsets to the base which can handle a maximum of 5
handsets. The handset number (1 to 5) is shown on the display.
With two or more handsets registered, you can make intercom calls
between the handsets, transfer an external call from one handset to
another, toggle between an external call and an intercom call, or set up a
three-way conference call between one external call and two handsets.
Note: Only one handset can be connected to an external line at a time,
except for in conference mode. If you try to make a call while another
handset is on the line, you will hear a busy tone.
Making an intercom call
1
r
Press INT.
Î icon and a list of handset numbers appears on the display.
2
@
Enter the handset number that you want to call.
Î The called handset rings. The ringer melody of an intercom call is
different from that of an external call.
3
<
On the called handset, press TALK/SPEAKER < to answer the
intercom call.
4
B
To end the call, press HANG-UP B on either handset..
Transfer an external call
You can transfer an external call to another handset that is registered
to the base unit.
1
r
During an external call, press INT.
Î The external call is put on hold and a list of handset numbers
appears on the display.
2
@
Enter the handset number that you want to transfer the call to.
3
When the called handset answers, you can announce the call.
4
B
Press HANG-UP B on the calling handset to transfer the call or
press HANG-UP
B on the called handset to cancel the transfer, and
return the external call automatically to the calling handset.
iDect_X5i_IFU_EN_UK.book Page 17 Monday, November 30, 2009 11:49 AM