Operation Manual

6
Switch speakerphone on/off
1
<
During a call, press TALK/SPEAKER <.
Î icon appears on the display.
2
<
To switch back to earpiece mode, press TALK/SPEAKER < again.
Note: If you are using the speakerphone, stay close to handset so that the other
party can hear you clearly.
Making a Call
Direct dial
1
<
Press TALK/SPEAKER <.
Î You will hear a dial tone.
2
@
Dial the desired number.
Pre-dial
1
@
b
Dial the desired number (maximum 24 digits).
If you make a mistake, press BACK/R/C
b to clear the digits from
the display.
2
<
Press TALK/SPEAKER <.
Note: You may need to insert a pause in the number if your phone is connected to a
PBX (for example, after you dial 9 for an outside line, or while waiting for a computer
access tone). Each pause entered will delay the dialling sequence by about 2
seconds.
Press and hold #/PAUSE/RINGER
# to insert a P in the dialling sequence.
Answering a call
<
When the phone rings, lift up the handset and press TALK/SPEAKER
<.
Î The call timer is displayed after 20 seconds, showing the duration
of the call.
Note: If Auto answer is set to On (see page 21), you can simply lift the
handset off the charging cradle to answer the call without having to
press TALK/SPEAKER
<.
iDect_X5i_IFU_EN_UK.book Page 6 Monday, November 30, 2009 11:49 AM