User guide

Clean the battery charging contacts on the base unit
with a dry cloth.
Check the connections between the base unit and the
mains power socket.
“I try to
recharge the
batteries, but I
still get a
warning that
they are low.”
You need to replace the batteries. To find out how to
obtain replacements, call 0845 345 9677, between
9.00 am and 5.00 pm, Monday to Friday.
Dispose of used batteries safely — never burn them,
or put them where they could get punctured.
ALWAYS use the batteries supplied with your iDECT X1i
— other batteries may burst, causing damage.
PBX use
“The Recall
function doesn’t
seem to work.”
You may need to change the recall signal length from
its default of 100 ms. Consult your PBX documentation
for help if necessary. To change the recall setting, use
the
BASESETTING menu (page 52).
“Last Number
Redial and/or
memory dialling
don’t work on
a PBX.”
When you first make a call, after keying in the outside
line access code (e.g. 9), press and hold the Last
Number Redial button until a
P appears on the
display. This inserts a pause between the access code
and the telephone number. You should later be able to
redial the number.
When storing numbers in memory, you can include the
outside line access code (e.g. 9) with each number.
If your PBX requires you to wait for a second Dial tone
before dialling the telephone number, press and hold
the Last Number Redial button for a pause
between the access code and the number.
Troubleshooting
Help Line: 0845 345 9677 (Local Call rate) 65
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:07
Color profile: Generic CMYK printer profile
Composite Default screen