User guide

Using a multi-handset system
“I can’t transfer
a call.”
Make sure the other handset is in range of the base unit.
Make sure you’re dialling the correct number for the
other handset (1 to 6, or Ø for all registered handsets).
The answering machine
“The machine
won’t record
messages.”
Make sure the answering machine is switched on.
The machine’s memory may be full. Delete some
messages to make room for new ones.
Check that outgoing message OGM1 is selected; with
OGM2 selected, callers can’t leave messages.
“I can’t switch
the machine
on.”
The machine’s memory may be full. Delete some or all
recorded messages (see page 36), then try again to
switch on.
“I can’t hear my
messages being
played back.”
Use the á or â button on the handset, to adjust the
volume in the earpiece or speakerphone.
“Remote
operation
doesn’t work.”
Make sure you’re using the correct remote PIN
(page 41).
Check that you’re using a tone-dialling phone. Some
cordless or mobile phones don’t generate continuous
tones, so aren’t suitable for remote operation.
Batteries
“The handset‘s
batteries are
running low
within an
hour or two.”
Before you first used the handset, you should have left it
on the base unit or charger pod for up to 15 hours to
charge the batteries fully.
You may need to replace the batteries (see below).
Troubleshooting
64
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:07
Color profile: Generic CMYK printer profile
Composite Default screen