User guide

!
The iDECT X1i must be serviced by trained engineers.
NEVER attempt any repairs or adjustments yourself
— you could make the problem worse and invalidate
the Guarantee.
ALWAYS check
first that:
■
you have followed all the steps listed on pages 5 to 7
to install and set up your iDECT X1i
■
all connectors are firmly inserted in their sockets
■
mains power is switched on at the socket
■
the handset’s batteries are correctly and securely
installed, and are not run down
Everyday use
“I cannot make
or answer calls.”
If the handset’s display is blank, it may be switched off.
Press the HANG UP button to switch it back on.
Check that the base unit’s mains power adapter is
plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone
— not just for charging the batteries.
Make sure you’re using the telephone line cable that
was supplied with your iDECT X1i. Other telephone line
cables might not work.
Move the handset closer to the base unit.
Check the Battery Level symbol on the display. If it’s
low, replace the handset on the base unit or charger
pod to recharge the batteries.
If auto-answer is turned off (page 47), you need to
press any button (except HANG UP) on the handset to
answer an incoming call. Turn auto-answer on if you
want to answer calls by simply lifting the handset from
the base unit or charger pod.
Switch off power at the mains socket, wait for a few
seconds and then switch back on. This may help.
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:06
Color profile: Generic CMYK printer profile
Composite Default screen
Troubleshooting
Help Line: 0845 345 9677 (Local Call rate) 61