User guide

Using a multi-handset system

If you have an iDECT X1i multi-handset system, you

already have more than one handset registered to your

base unit. You can register additional handsets — up to

four per base unit. With two or more handsets, you can:

■

make intercom calls from one handset to another

■

transfer an outside call from one handset to another

■

shuttle between an outside call and an intercom call

■

set up a three-way conference call

Each handset’s number (1 to 4) is shown on its display.

Only one handset can be connected to the outside

line at once. If you try to make a call while another

handset is already on the line, you’ll hear Busy tone.

To make an

intercom call

There are two ways to make an intercom call.

First method:

1 Press and hold the INT/# button for 2

seconds until

INTERCOM is shown on the

display

2 Use the á or â button to scroll through

available handset numbers, then press the

PHONE/OK button

The other handset rings, and its display

shows

INTERNAL FROM # (with your handset

number). When the other handset user

answers, you’ll be connected.

Second method:

1 Press the MENU button then the â button

TWICE

The display shows INTERNAL CALL

2 Press the PHONE/OK button

INTERCOM appears on the display, and you

can carry on to select the handset number

(step 2 of the first method).

Help Line: 0845 345 9677 (Local Call rate) 23

E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp

12 June 2006 10:54:00

Color profile: Generic CMYK printer profile

Composite Default screen