User guide

31
7 CALLER DISPLAY (NETWORK DEPENDENT)
If you have subscribed to the Calling Line Idenficaon (CID) service with
your network service provider, the phone number of your caller will
appear on the handset display, alternang with CALLING, when there is
an incoming call and be stored in your Call Log aerwards.
If the caller’s number is stored in your phonebook, the name from the
phonebook will appear with the number on the handset display when
the call is received and in the Call Log aerwards.
Note:
If the call is from someone whose number is unavailable (e.g. an
internaonal call or from a private exchange), the handset will display
UNAVAILABLE when you receive the call and in the Call Log aerwards.
If the call is from someone whose number is withheld (e.g. by dialling
141), the handset will display WITHHOLD ID when you receive the call
and in the Call Log aerwards.
If you have not subscribed to the Caller Line Idenficaon service, the
handset will display CALLING when you receive the call, and it will not be
saved in the Call Log.
CID informaon varies by country and network operators.
7.1 Call Log
The Call Log stores the last 20 different external calls on each handset,
whether or not you have answered the call.
Only the most recent call is saved for repeat calls from the same number.
When the Call Log is full, the next new call will replace the oldest entry.
(Note: if VOICEMAIL is one of the entries, it will not be replaced in the
list, but will have to be deleted manually.)
7.1.1 Access the Call Log
1. From the home screen, press
+ on your handset.
2. Press
+ or - to browse through the call list.
• The calls are displayed in chronological order with the most
recent call at the top of the list.
• If a name is shown or there are more than 14 digits, press
# to
step through the rest of the call informaon.
9 CLOCK AND ALARM SETTINGS
9.1 Date and Time Sengs
If you have subscribed to the Calling Line Idenficaon service, the me
and date sengs will be automacally updated by the network when you
receive an incoming call, but you may sll need to set the correct year.
You can also set the date and me manually.
1. From the home screen, press
M.
2. Press
+ or - to CLOCK&ALARM and the press M to select.
3. Press
M again to select DATE & TIME.
• The last stored date is displayed, with the third digit of the year
flashing.
4. Enter the current date and press
M to confirm.
Enter the date in the format YY/MM/DD, e.g.03 May 2014 as [1], [4],
[0], [5], [0], [3].
If you make a mistake, press
m to go back to the previous digit
entered.
5. Enter the current me and press
M to confirm. The default me
format is 24 HOURS. (To change the me format, see 9.1.1 Change
the Time Format.)
For 24-hour format, enter 1:30pm as [1], [3], [3], [0].
For 12-hour format, enter 1:30 am or pm as [0],[1],[3],[0] and then
press
+ to select am , or press - to select pm.
If you make a mistake, press
m
to go back to the previous digit
entered.
• A confirmaon tone is played.
6. Press
O
to return to standby mode.
7.1.2 Save a Call Log Entry into the Phonebook
1. From the home screen, press
+.
2. Press
+ or - to select an entry and then press M.
3. Press
M again to select SAVE NUMBER.
4. Enter the name of the contact (maximum 12 characters) and then
press
M
to save the name.
5. Edit the number (if necessary) and then press
M to save the entry.
• A confirmaon tone is played.
6. Press
O
to return to standby mode.
7.1.3 Delete a Call Log Entry
1. From the home screen, press
+.
2. Press
+ or - to select an entry and then press M.
3. Press
+ or - to DELETE and then press M to select.
• CONFIRM? is displayed.
4. Press
M
again to confirm.
• A confirmaon tone is played.
5. Press
O
to return to standby mode.
7.1.4 Delete All Entries in the Call Log
1. From the home screen, press
+.
2. Press
M
.
3. Press
+ or - to DELETE ALL and then press M to select.
• CONFIRM? is displayed.
4. Press
M
again to confirm.
• A confirmaon tone is played.
8 REDIAL
The redial list stores the last 10 numbers dialled from the handset. A
maximum of 24 digits can be displayed for each entry.
If you have stored a name in the phonebook to go with the number, the
name will be displayed instead, and you can press
# to see the
number.
8.1 Access the Redial List
1. From the home screen, press
R .
2. Press
+ or - on your handset to browse the redial list.
• The last dialled number will appear first in the redial list.
• If the number has more than 14 digits on the handset, press
#
to see the other digits.
8.2 Save a Redial Number into the Phonebook
1. From the home screen, press
R .
2. Press
+ or - to select an entry and press M.
3. Press
M again to select SAVE NUMBER.
4. Enter the name of the contact (maximum 12 characters) and then
press
M.
5. Edit the number (if necessary) and then press
M to save.
• A confirmaon tone is played.
6. Press
O
to return to standby mode.
8.3 Edit a Redial Number
1. From the home screen, press
R .
2. Press
+ or - to select an entry and then press M.
3. Press
+ or - to EDIT ENTRY and then press
M
to select.
4. Edit the number and press
M
to confirm.
• A confirmaon tone is played.
5. Press
O
to return to standby mode.
8.4 Delete a Redial Number
1. From the home screen, press
R .
2. Press
+ or - to select an entry and then press M.
3. Press
+ or - to DELETE and then press
M
to select.
• CONFIRM? is displayed.
4. Press
M
again to confirm.
• A confirmaon tone is played.
5. Press
M
to return to standby mode.
8.5 Delete All Entries from the Redial List
1. From the home screen, press
R .
2. Press
M
.
3. Press
+ or - to DELETE ALL and then press
M
to select.
• CONFIRM? is displayed.
4. Press
M
again to confirm.
• A confirmaon tone played.
9.1.1 Change the Time Format
The me can be displayed either as 12-hour or 24-hour. The default
seng is 24 HOUR.
1. From the home screen, press
M.
2. Press
+ or - to CLOCK&ALARM and then press M to select.
3. Press
+ or - to SET FORMAT and then press M to select.
4. Press
M again to select TIME FORMAT.
• The current seng is displayed.
5. Press
+ or - to select 12 HOUR or 24 HOUR and then press M
to confirm.
• A confirmaon tone is played.
6. Press
O
to return to standby mode.
9.1.2 Change the Date Format
The date can be displayed either as Month/Day (MM/DD) or Day/Month
(DD/MM). The default seng is DD/MM.
1. From the home screen, press
M
.
2. Press
+ or - to CLOCK&ALARM and then press M to select.
3. Press
+ or - to SET FORMAT and then press M to select.
4. Press
+ or - to DATE FORMAT and then press M to select.
• The current seng is displayed.
5. Press
+ or - to select DD/MM or MM/DD and then press M
to confirm.
• A confirmaon tone is played.
6. Press
O
to return to standby mode.
9.2 Alarm Sengs
An alarm can be set on a handset, to sound at a set me only once or
repeated each day.
When an alarm is set, the alarm icon is shown on the handset display.
When the alarm me is reached, the handset will flash -ALARM- on the
display and sound an alarm for 1 minute.
When the alarm rings, you can press any key on the handset to stop the
ringing, even if the key lock is acvated.
1. From the home screen, press
M.
2. Press
+ or - to CLOCK&ALARM and then press Mto select.
3. Press
+ or - to ALARM and then press M to select.
4. Press
+ or - to show your required alarm opon.
OFF: Turn alarm off
ONCE: The alarm sounds once at the set me.
DAILY: The alarm sounds daily at the set me.
5. Press
M to select the displayed opon.
6. If ONCE or DAILY is selected, enter the desired hour and minutes.
Press
+ to select am, or press - to select pm if the me is in
12-hour format.
7. Press
M to confirm the alarm seng.
• A confirmaon tone is played.
8. Press
O
to return to standby mode.
9.2.1 Set the Alarm Tone
You can select from 3 alarm melodies.
1. From the home screen, press
M.
2. Press
+ or - to CLOCK&ALARM and then press M to select.
3. Press
+ or - to ALARM MELODY and then press M to select.
4. Press
+ or - to select the desired alarm tone (each tone will
sound as it is selected) and then press
M
to confirm.
• A confirmaon tone is played.
5. Press
O
to return to standby mode.