User guide

27
5 DIRECT ACCESS MEMORIES
In addion to the phonebook memory, there are 2 direct access
memories (Keys 1 & 2) on each handset. A long press on these keys in
standby mode will automacally dial the stored phone number.
When the key is inially pressed the display will show the digit 1 or 2,
and then change to show the stored number as it makes the call.
If no number is stored in the direct access memory, you will hear an error
tone and the display will only show a pre-dial digit 1 or 2.
5.1 Add or Edit Direct Access Memory
1. From the home screen, press
M.
2. Press
+ or - to PHONEBOOK and then press M to select.
3. Press
+ or - to DIRECT MEM. and then press M to select.
4. Press
+ or - to KEY 1 or KEY 2 and then press M to
select.
• The stored name is displayed, or NO NUMBER if it is empty.
5. Press
M to show EDIT NUMBER and then press OK/Menu to select.
• The display shows the currently stored name or just ENTER NAME
if it is empty.
6. Edit or enter the name of your contact and press
M.
If you make a mistake, press
m
to delete the last character entered.
• The display shows the currently stored number or just ENTER
NUMBER if it is empty.
7. Edit or enter the number of your contact and press
M.
If you make a mistake, press
m
to delete the last digit entered.
• A confirmaon tone is played.
8. Press
O
to return to standby mode.
5.2 Delete Direct Access Memory
1. From the home screen, press
M.
2. Press
+ or - to PHONEBOOK and then press M to select.
3. Press
+ or - to DIRECT MEM. and then press M to select.
4. Press
+ or - to KEY 1 or KEY 2 and then press M to select.
• NO NUMBER is displayed if it is empty. Otherwise, the stored
name is displayed.
5. Press
M to show EDIT NUMBER.
6. Press
+ or - to show DELETE and then press M to select.
• CONFIRM? is displayed.
7. Press
M again to confirm.
• A confirmaon tone is played.
8. Press
M to return to standby mode.