User guide

11
2 INSTALLING YOUR PHONE
2.1 Connecng the Base Staon
1) Plug the mains power cable and
telephone line cord into the sockets
in the underside of the base
staon.
2) Plug the power adapter into a
100 - 240Vac, 50 - 60Hz mains power
socket, and the telephone line cord into a telephone line socket.
Warning:
Always use the cables provided in the box.
Use only the supplied adaptor. Using other adaptors may damage the
unit.
Note:
Place the base unit within easy reach of a mains power socket.
Never try to lengthen the mains power cable.
The base staon needs mains power for normal operaon, and the
cordless handsets will not work without it.
2.2 Installing and Charging the Rechargeable Baeries
1) Insert the 2 supplied baeries into the baery
compartment, observing the correct polarity,
as shown.
Warning: Use only the supplied NiMH rechargeable
baeries.
2) Place the back cover over the back of the
handset and press down unl it clicks into place.
3) Place the handset on the base and charge for
15 hours before using the handset for the first
me.
• The handset will give a double beep when it is properly placed on
charge and the baery charging indicator on the base or charging
pod lights up to indicate charging.
2.3 Removing the back cover of the Boomerang Handset
Insert the supplied key into the groove as indicated in the illustraon and
twist it clockwise to release the back cover.
If you have a broadband line
If you connect your telephone to a line with a broadband connecon,
you will need to insert a micro-filter between the telephone and the
telephone line; otherwise you may get interference between the
telephone and the broadband, which could cause problems.
In a home with broadband, every telephone must have a micro-filter
connected, not just the one at the telephone point that your modem is
connected to.
If you need more broadband micro-filters contact your broadband
supplier.