User guide

33
9.5.7.3 Access Your Answering Machine Remotely
You can ring your iDECT L1i from another tone-dialling phone to switch
the answering machine on or off, or to listen to your messages remotely.
2. When the answering machine answers the call, press the <*> key while
the OGM is still playing.
3. Enter the 4-digit Remote Access PIN.
Note: The <*> must be entered while the OGM is playing, and the 4 - digit
PIN should follow without any delays. If the 4-digit Remote Access PIN is
entered incorrectly three times consecutively, the line will be released
automatically.
4. Press the following keys to operate the answering machine remotely.
Remote operation
Using a tone-dialling phone, dial your home number
You can also use the codes on the other side of this card
While your outgoing message is playing, press
Key in your remote security code
The default code is 0000. For details of how to set a new code,
see the User Guide 9.5.7.1 on page 32.
1
2
3
4
Note: The <*> key must be entered while the OGM is still playing, and the 4-digit
Note: If your answering machine is switched off, the phone will enter into
the remote access mode after 14 rings.
You can then enter the 4-digit remote access PIN
(Default Remote Access PIN is 0000) to activate the remote access feature.
PIN should follow without any delays. If the 4-digit Remote Access
PIN is entered incorrectly three times consecutively, the line will be released
automatically.
system
L1i
1. Place a call from a tone-dialling phone to your iDECT L1i.