User guide

24
8.1.7 Turn on or off the auto answer
If you turn on the Auto Answer, you can answer a call automatically
by just lifting the handset off the base or charger, without having to
press any key.
1. Press [ Menu ] and <UP/DOWN> to scroll to HS Settings.
2. Press [ Select ] and <UP/DOWN> to scroll to Auto Answer.
3. Press [ Select ] and <UP/DOWN> to scroll to On or Off.
4. Press [ Select ] to confirm your Auto Answer setting.
8.1.8 Set handset display language
You can change the language used on the handset display to one of the
other available options.
1. Press [Menu] and <UP/DOWN> to scroll to HS Settings.
2. Press [Select] and <UP/DOWN> to scroll to Language.
3. Press [Select] and <UP/DOWN> to select the language you want to see.
4. Press [Select] to confirm the language setting.
8.1.9 Audio settings
You can set the earpiece or speaker volume levels from this menu, as well
as adjusting it during a call with the <UP/DOWN> keys.
1. Press [Menu] and <UP/DOWN> to scroll to HS Settings.
2. Press [Select] and <UP/DOWN> to scroll to Audio Setup.
3. Press [Select] and <UP/DOWN> to select the Speaker or Ear
Volume you want to adjust.
4. Press [Select] and <UP/DOWN> to adjust the level.
5. Press [OK] to confirm the setting.
8.1.10 Select base station
If your handset is registered to more than one base station, you can select
which base station to use.
1. Press [ Menu ] and <UP/DOWN> to scroll to HS Settings.
2. Press [ Select ] and <UP/DOWN> to scroll to Select Base.
3. Press [Select ] and <UP/DOWN> to select your desired base station.
Note: An " * " is marked against the currently used base.
4. Press [ Select ] to confirm.
Note: If the selected base is found successfully, "Saved " will display,
otherwise, "Failed " will display.