Operation Manual

62
Note:
Note:Note:
Note: After entering the Master PIN on either the Main Eclipse Handset
or the additional handset,
• WAITING
WAITINGWAITING
WAITING flashes on the screen.
• A confirmation tone is played to indicate successful registration,
and the handset returns to standby mode, with its handset
number displayed.
• If no base is found with the entered PIN, error tones are played to
indicate failed registration and
PLS REG H/S
PLS REG H/SPLS REG H/S
PLS REG H/S is displayed on the
screen. You will need to repeat from step 1 above.
• During steps 2-5, if no key is pressed on the handset within 10
seconds, the registration
procedure will be aborted. If this happens,
repeat from step 1 above.
10.3
10.310.3
10.3 De
DeDe
Deregister your
register your register your
register your H
HH
Handset
andsetandset
andset
You can deregister the handset you are using, or any other handset
registered to the same base. The default Master PIN is 0000
00000000
0000.
- Using
UsingUsing
Using Your
YourYour
Your Main
MainMain
Main Eclipse Handset
Eclipse HandsetEclipse Handset
Eclipse Handset
1. From the home screen, press
M.
2. Press +/- to SETTINGS
SETTINGSSETTINGS
SETTINGS and then press M to select.
3. Press
+/- to DEREGISTER
DEREGISTERDEREGISTER
DEREGISTER and then press M to select.
4. Enter the Master PIN and then press
M to confirm.
5. Press
+/- to select the handset number you want to
deregister and then press
M to confirm, or press O to cancel
the deregistration procedure.
- Using an
Using anUsing an
Using an Additional Handset
Additional HandsetAdditional Handset
Additional Handset
1. From the home screen, press
M .
2. Press
+\- to ADVANCED SET
ADVANCED SETADVANCED SET
ADVANCED SET and then press M to select.
3. Press +\- to UN
UNUN
UNREGISTER
REGISTERREGISTER
REGISTER and then press M to select.
4. Enter the Master PIN and then press M to confirm.
5. Press +\- to select the handset number you want to
un-register and then press M to confirm, or press O to cancel
the un-registration procedure.