Operation Manual

61
10
1010
10 SETTINGS
SETTINGSSETTINGS
SETTINGS
10.1
10.110.1
10.1 Handset
HandsetHandset
Handset
Registration
RegistrationRegistration
Registration
IMPORTANT:
IMPORTANT:IMPORTANT:
IMPORTANT: When you purchase your phone system, all handsets are
already registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if
a handset has become faulty.
You can register up to four handsets to one base station, with each
handset’s number (1 to 4) shown on its display.
Note:
Note:Note:
Note:
Each handset can only be registered to one base.
You need to enter the Master PIN before you can register or deregister
handsets. The default Master PIN is 0000
00000000
0000.
10.2
10.210.2
10.2 Register A
Register ARegister A
Register Additional
dditional dditional
dditional H
HH
Handsets
andsetsandsets
andsets
-
For a
For aFor a
For a
Main
MainMain
Main
Eclipse
Eclipse Eclipse
Eclipse Type
Type Type
Type Handset
HandsetHandset
Handset
1. Press and hold the
key under the base unit for approximately 5 seconds.
The message indicator on the base will flash for up to 1 minute,
while it is in registration mode.
2. On the handset, press M.
3. Press
+/- to SETTINGS
SETTINGSSETTINGS
SETTINGS and then press M to select.
4. Press
+/- to REGISTRATION
REGISTRATIONREGISTRATION
REGISTRATION and then press M
to select.
5. Enter the Master PIN and then press
M
to confirm.
-
For an
For anFor an
For an
Additional
Additional Additional
Additional Type
Type Type
Type Handset
HandsetHandset
Handset
1. Press and hold the
key under the main Eclipse base unit for
approximately 5 seconds.
The message indicator on the base will flash for up to 1 minute,
while it is in registration mode.
2. On the handset, press
M
.
3. Press
+\- to ADVANCED SET
ADVANCED SETADVANCED SET
ADVANCED SET and then press
M
to select.
4. Press
+\- to REGISTRATION
REGISTRATIONREGISTRATION
REGISTRATION and then press
M
to select.
5. Enter the Master PIN and then press
M
to confirm.