Operation Manual

27
4.6
4.64.6
4.6 Mute/Unmute the
Mute/Unmute the Mute/Unmute the
Mute/Unmute the M
MM
Microphone
icrophoneicrophone
icrophone
When the microphone is muted, the handset displays MUTE ON
MUTE ONMUTE ON
MUTE ON, and
your caller cannot hear you.
During a call, press
m (Main Eclipse handset) or press m (additional
handsets) to turn on/off the microphone.
4.7
4.74.7
4.7 Paging
PagingPaging
Paging
The paging feature enables you to locate a missing handset if the handset
is in range and contains charged batteries.
1. Press the
key under the base unit.
• All the registered handsets that are in range will start to ring.
You can stop the paging by pressing any key on a handset or the key
under the base unit again.
4.8
4.84.8
4.8 Switching
Switching Switching
Switching the
the the
the H
HH
Handset
andset andset
andset O
OO
On/
n/n/
n/O
OO
Off
ffff
ff
Press and hold O on your main Eclipse Handset or press O on the
additional handsets for more than 2 seconds to switch the handset on or
off in standby mode.
• When first turned on, the display shows SEARCHING
SEARCHINGSEARCHING
SEARCHING…
……
… until the
handset finds the base.
N
NN
Note:
ote:ote:
ote: You can switch the handset off to save battery life, if the handset is
not on the base or a charging pod and you do not want to use it for a
while.
IMPORTANT:
IMPORTANT:IMPORTANT:
IMPORTANT: When the handset is OFF, it cannot be used for making calls
including emergency calls. It will not ring when there is an incoming call.
To answer a call, you will need to switch it back on and it may take some
time for the handset to re-establish a radio link with the base unit.