Operation Manual

8
2
22
2 INSTALLING YOUR PHONE
INSTALLING YOUR PHONEINSTALLING YOUR PHONE
INSTALLING YOUR PHONE
2.1
2.12.1
2.1 Connecting the
Connecting the Connecting the
Connecting the B
BB
Base
ase ase
ase S
SS
Station
tationtation
tation
1) Plug the mains power cable and telephone
line cord
into the base station.
2) Plug the power adapter into a 100 - 240Vac,
50 - 60Hz mains power socket, and the
telephone line cord
into a telephone line socket.
Warning:
Warning:Warning:
Warning:
Always use the cables provided in the box.
Use only the supplied adaptor. Using other power
cables may damage the unit.
Note
NoteNote
Note:
::
:
Place the base unit within easy reach of the mains power socket.
Never try to lengthen the mains power cable.
The base station needs mains power for normal operation, and the
cordless handsets will not work without it.
2.2
2.22.2
2.2 Installing and
Installing and Installing and
Installing and C
CC
Charging the
harging the harging the
harging the R
RR
Rechargeable
echargeable echargeable
echargeable B
BB
Batteries
atteriesatteries
atteries in the Main
in the Main in the Main
in the Main
Eclipse Handset
Eclipse HandsetEclipse Handset
Eclipse Handset
1) Insert the 2 supplied batteries into the battery
compartment, observing the correct polarity
(see markings inside battery compartment).
Warning:
Warning:Warning:
Warning: Use only the supplied NiMH rechargeable
batteries.
2) Place the back cover over the back of the
handset and press down until it clicks into place.
3) Place the handset on the base and charge for 15
hours before using the handset for the first
time.
•
The handset will give a double beep when it
is properly placed on the base and the
battery charging indicator on the base
lights up to indicate charging.
Note:
Note:Note:
Note: The handset may become warm when the batteries are being
charged or during prolonged periods of use. This is normal and does not
indicate a fault.
T
o the
telephone
line socket
To
the mains
power socket