Operation Manual

49
10
1010
10 CLOCK
CLOCKCLOCK
CLOCK AND ALARM
AND ALARM AND ALARM
AND ALARM SETTINGS
SETTINGSSETTINGS
SETTINGS ON YOUR CORDLESS
ON YOUR CORDLESS ON YOUR CORDLESS
ON YOUR CORDLESS
HANDSET
HANDSETHANDSET
HANDSET
10.1
10.110.1
10.1 Date and
Date and Date and
Date and T
TT
Time
ime ime
ime S
SS
Settings
ettingsettings
ettings
If you have subscribed to the Calling
CallingCalling
Calling Line Identification
Line IdentificationLine Identification
Line Identification (CLI)
(CLI)(CLI)
(CLI) service, the
time and date settings will be automatically updated by the network
when you receive an incoming call, but you may still need to set the
correct year.
You can also set the date and time manually.
1. From the home screen, press
M .
2. Press
+ \-to CLOC
CLOCCLOC
CLOCK&
K&K&
K&ALAR
ALARALAR
ALARM
MM
M and then M to select.
3. Press M again to select D
DD
DA
AA
ATE/TIME
TE/TIMETE/TIME
TE/TIME.
• The last stored date is displayed, with the third digit of the year
flashing.
4. Enter the current date and press M to confirm.
Enter 03 May 2012 as [1], [2], [0], [5], [0], [3].
If you make a mistake, press
m to delete the last digit
entered.
5. Enter the current time and press M to confirm. The default time
format is 24
2424
24 HOURS
HOURSHOURS
HOURS. (To change time format, see Change the
Change the Change the
Change the T
TT
Time
ime ime
ime
F
FF
Format
ormatormat
ormat on your Cordless Handset
on your Cordless Handseton your Cordless Handset
on your Cordless Handset on page 50 .)
For 24-hour format, enter 1:30pm as [1], [3], [3], [0].
For 12-hour format, enter the time and then press
+ to
select
AM
AMAM
AM or -for PM
PMPM
PM .
If you make a mistake, press
m to delete the last digit
entered.
• A confirmation tone is played.
6. Press O to return to standby mode.