Operation Manual

19
4.8
4.84.8
4.8 Initiate an Intercom Call
Initiate an Intercom CallInitiate an Intercom Call
Initiate an Intercom Call from the Corded Base to a
from the Corded Base to a from the Corded Base to a
from the Corded Base to a Registered
Registered Registered
Registered Cordless
Cordless Cordless
Cordless
Handset
HandsetHandset
Handset
The system allows an intercom call between the corded base and a
registered cordless handset.
1. Pick up the corded handset from the corded base or press S.
2. Press
at the bottom of the corded base.
•
All registered cordless handsets will start to ring.
3. Press T on any handset to intercom with the corded base.
•
The paging tone on all handsets and the corded base will stop.
Note:
Note:Note:
Note:
1) You can cancel the intercom call before it is answered by pressing
at the bottom of the corded base.
2) If there is no answer from the cordless handset within one minute,
the paging will be cancelled automatically.
4.9
4.94.9
4.9 A
AA
Answer an External Call
nswer an External Call nswer an External Call
nswer an External Call d
dd
during an Intercom Call
uring an Intercom Calluring an Intercom Call
uring an Intercom Call on the Corded Base
on the Corded Baseon the Corded Base
on the Corded Base
You will hear an alert tone when you receive an incoming external call
during an intercom call on your corded base, and you can choose from the
following options:
1) Replace the corded handset onto the corded base or press
S to
end the intercom call. The base will start ringing and you can answer
the incoming call like a normal call.
2) Press
at the bottom of the corded base to put the intercom call on
hold and answer the incoming call. Then you can press and hold
to
set up a conference call between all three parties, or you can end the
call on the corded handset, which will transfer the incoming call to the
other intercom handset.