User's Manual

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <OK> and <UP/DOWN> to select RECORD TIME (Available
180S, or UNLIMITED)
4. Press <OK> and <UP/DOWN> to select your desired recording time.
5. Press <OK> to confirm.
8.5.7 Change the Compression Rate
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.
2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <OK> and <UP/DOWN> to select COMPRESSION.
4. Press <OK> and <UP/DOWN> to select your desired compression rate.
5. Press <OK> to confirm.
8.5.8 Activate Remote Access
8.5.8.1 Change the 4-Digit Remote Access PIN
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.
2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <OK> and <UP/DOWN> to select CHANGE PIN.
Press <OK> and enter the Old PIN. (Default Remote Access PIN is 0000).
5. Press <OK> and enter the New PIN.
6. Press <OK> and enter the New PIN again.
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
ntered in Step 5, you must enter the new system PIN at step 5 again.
7. Press<OK>to reconfirm.
Three different compression rates (HIGH, MEDIUM and LOW) are provided for
you to select different quality levels of recording incoming message. The lower
shorter the total recording time available. (For example, about 9 minutes on
LOW, 12 minutes on MEDIUM, and 18 minutes on HIGH.)
Your phone lets you check your messages, or otherwise operate your
answering machine, by calling the answering machine when you are away from
PIN code is used to prevent other people from
home and then dialling a 4-digit remote access PIN from a tone-dialing phone.
The 4-digit
remote access
unauthorised access of your answering machine.
options: 60S, 120S,
the compression rate, the higher the recording quality level attained, but the
29