User guide

“My call was cut
off when I went
out of range.
Now I can’t use
my handset.”
Move the handset closer to the base unit before you try
again to make a call.
“There is inter
-
ference and
noise on the
line.”
Move the handset closer to the base unit, or to a
different position.
Try moving the base unit so that it’s not near other
electrical equipment, such as a television or a
computer.
You’ll get the best results if you site the base unit as
high as possible. For example, in a two-storey house,
the first-floor landing is an ideal place for the base unit.
“I hear ‘beeps’
from my
handset while
I’m on a call.”
You may be going out of range of the base unit. Move
closer, or your call may be cut off.
Check the Battery Level symbol on the display. If it is
low, recharge the batteries.
“When I try to
make a call, I
hear Busy
tone.”
If you’re using a e820 Twin system, or have extra
handsets registered to your base unit, check that
another handset isn’t already in use on a call.
Troubleshooting
48
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:22
Color profile: Generic CMYK printer profile
Composite Default screen