User guide

To set
additional
‘local’ dialling
codes
1 Press the PROG button then 2 4 1
2 Key in the first dialling code (up to 6 digits)
3 Press the PHONE/OK button to confirm
4 Press 4 2
5 Key in the second dialling code (up to 6 digits)
6 Press the PHONE/OK button to confirm
To turn
Indirect
Network on
and off
You need to do this on each handset.
1 Press the PROG button then 1 4
2 Use the  or  buttons to set:
0 for Indirect Network off
1 for Indirect Network on
3 Press the PHONE/OK button to confirm
When you make a call, the handset will dial the network
access code when you dial a number beginning with 0,
except when it’s to one of the ‘local’ codes you have set.
When a call is routed via Indirect Network,
LC is shown
on the display.
!
Note — for Indirect Network to work, you must dial
the phone number (or select it from memory, LNR
memory or Caller Display memory) before you press
the PHONE/OK button for an outside line.
Indirect Network
45
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:22
Color profile: Generic CMYK printer profile
Composite Default screen