User guide

Handset registration

The handset(s) supplied with your base unit are already

registered; you shouldn’t need to re-register them. But

if you’ve bought extra handsets separately, you will

need to register them. Each handset can be registered

to up to four base units, numbered 1 to 4.

To register a

new handset

or to re-

existing

handset

1 Press and hold the HANDSET LOCATOR

button on the base unit until you hear

Registration tone (slow ‘beeps’)

You now have 30 seconds in which to register

the handset.

2 On the handset, press the PROG button

then key in 1 6 followed by 1 (the base

unit number)

3 Key in 0000 (the base unit’s PIN

code)

4 Press the PHONE/OK button

The display shows the handset numbers

which are still free on the base unit.

5 (Optional) Key in a handset number

If you don’t key in a number at this point, the

handset will be registered with the lowest free

number.

The handset beeps to confirm registration.

To register

your handset

to a new base

unit

Follow the steps above, but key in a new base unit

number (2, 3 or 4) sfter 16 at step 2.

E:\Binatone2004\e820\e820_UK_03.vp

15 November 2004 11:48:17

Color profile: Generic CMYK printer profile

Composite Default screen