Operation Manual

Using a multi-handset system
If you have an e3250 multi-handset system, you already
have up to six handsets registered to your base unit. You
can register additional handsets — altogether, up to six
handsets per base unit. With two or more handsets
registered, you can:
■
make intercom calls from one handset to another
■
transfer an outside call from one handset to another
■
shuttle between an outside call and an intercom call
■
set up a three-way conference call
Each handset’s number (h1 to h6) is shown on its
display.
!
Only one handset can be connected to the outside
line at once. If you try to make a call while another
handset is already on the line, you’ll hear Busy tone.
!
Some of the instructions in this section tell you to
press a button ‘for one second’. This means that you
should press the button and hold it down for a
moment until the display changes, you hear a tone,
or you are connected to another call.
To make an
intercom call
1 Press the INT (✱) button for one second
INT appears on your handset’s display, with the
numbers of all other registered handsets.
2 Key in a handset number; or press 9 to call
all other registered handsets
The other handset rings, and the
INT symbol
flashes on its display. When the other handset
user answers, you will be connected.
16
E:\Binatone2003\e3400\e3400_07.vp
11 March 2003 10:11:57
Color profile: Generic CMYK printer profile
Composite Default screen
Downloaded from www.Manualslib.com manuals search engine