Operation Manual
61
9.12 TAM Settings
9.12.1 Set the Answer Delay
You can set the number of rings before the answering machine answers
TIME SAVER.
When you ring in to access your messages remotely, if your answering
machine is set to time saver, it will answer after 2 rings if you have new
messages, or after 6 rings if you do not have any new messages, so if
and starts playing your OGM. You can set the answering machine to
answer after two to eight rings or
you call in and don't get an answer within 4 or 5 rings, you can hang up
and save on call charges.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
ANSWER DELAY.
9.12.2 Set the Maximum Recording Time for Incoming Messages
You can set the maximum length of the recording time of the incoming
messages to be either 1, 2 or 3 minutes, or of unlimited length up to the
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
Press <MENU/OK> and <UP/DOWN> to select RECORD TIME.
Press <MENU/OK> and <UP/DOWN> to select your desired recording
Press <MENU/OK> to confirm.
time from the available options 60S, 120S, 180S or UNLIMITED.
available memory left on the answering machine.
delay from the available options 2 RINGS, 4 RINGS, 6 RINGS,
Press <MENU/OK> and <UP/DOWN> to select the desired answer
8 RINGS or TIME SAVER.
9.12.3 Turn On or Off the Base Screening
You can select to turn on or off the call screening on the base.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
Press <MENU/OK> and <UP/DOWN> to select BS SCREENING.
Press <MENU/OK> and <UP/DOWN> to select ON or OFF.
Press <MENU/OK> to confirm.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTING.
3. Press <MENU/OK> and <UP/DOWN> to select
4.
5. Press <MENU/OK> to confirm.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTING.
3.
4.
5.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTING.
3.
4.
5.
9.12.4 Activate Remote Access
Your phone lets you check your messages, or otherwise operate your
answering machine, by calling the answering machine when you are away
from home and then dialling a 4-digit remote access PIN from a tone-dialling
phone, provided the Remote Access is turned on.










