User's Manual

Binatone Help Line : 0845 345 9677 38
This allows you to restore base settings to their default settings:
Ext Ringer Volume = 5
Press
the MENU/OK/MUTE, scroll DOWN until you see SETTINGS.
Press the MENU/OK/MUTE then scroll DOWN until you see “BS DEFAULT”.
Press the MENU/OK/MUTE and the display will show "PIN ? "
Enter the PIN code using the keypad. (Default PIN is 0000)
Press the MENU/OK/MUTE and you will hear the confirmation beeps and
the display will return to idle mode.
Ext Ringer Melody = 1
To Set Base to default settings
Int Ringer Volume = 5
Int Ringer Melody = 2
Dial Mode = TONE
Flash Time = 100ms
Key Tone = ON
Language = ENGLISH
PIN CODE = 0000
The Caller Display (CID) and Redial lists will be erased, but the Phonebook memories 
and TAM settings will remain unchanged.
However, for some old telephone lines or PABX systems you may need to change
Press the MENU/OK/MUTE.
Scroll DOWN until you see “SETTINGS”.
Press the MENU/OK/MUTE and then you will see “DELETE HS”.
Scroll the DOWN until you see “DIAL MODE”. Prethe ss MENU/OK/MUTE
Press the MENU/OK/MUTE and the display will show
the current setting of Dialling Mode e.g. "TONE" or PULSE”.
Press the UP or DOWN button to show the dialling mode you want on 
Press the MENU/OK/MUTE button to confirm the option, and you will hear the 
confirmation beeps. The display will return to "DIAL MODE" .
Press PHONE BOOK/BACK until you return to idle mode.
To Set Dialling Mode (Tone/Pulse)
the dialling mode from Tone to Pulse.
or
The default setting of this CC2310 telephone is TONE (also called Touch Tone, MF or DTMF),
and normally this will be correct for the UK, so will not need to be changed.
the display.