User's Manual

Binatone Help Line : 0845 345 9677 31
If the answering machine is ON and set for OGM1, when there is an incoming call, the
answering machine will answer it and play the OGM, followed by a "beep". The caller can
then leave a message of up to 2 minutes on the answering machine. The caller's voice
x You can use the corded handset, the speakerphone or the cordless handset to
intercept the call to speak to the caller during ICM recording. Then the message that
is currently being recorded will be saved as a new message unless the user presses
STOP during the message, and then the message will not be
x
You can pick up a parallel phone to intercept the call, and the message will be
Incoming Call Messages (ICM)
saved up to then.
will
also be played through the loudspeaker to allow you to screen the call and decide if
you want to leave the answering machine to record the message, or if you want to talk to
the caller directly.
This allows users to record amemo of up to 120 seconds. Memos count as
messages when played
Press and hold MEMO/SKIP key and the display will show"MEMO" and you
will hear "Please record memo after the beep". Then the display will show
When you want to end your memo recording press the STOP/ON/OFF.
x
If the memory is full, during the memo recording, you will hear SORRY, THE
MEMORY IS FULL and the display will return to idle mode.
To record a memo on TAM
"RECORD" and the current recording time.
To play/pause messages on TAM
If you have new messages, the Message light will flash and the
display will show e.g. 01/02 MSGS, which means you have 1 new message/2
messages altogether.
* There is approximately 60 minutes of recording time on the TAM.
Press the PLAY/PAUSE to listen to messages and memos. Press the
PLAY/PAUSE if you want to pause during a message.
Press the OGM/REWIND if you want to skip back to the previous message.
Press the MEMO/SKIP
if you want to skip forward to the next message.
Press the STOP/ON/OFF if you want to stop the message playback.
saved as a new message.