User's Manual

Binatone Help Line : 0845 345 9677 27
OGM1 is set as the default announcement when you set up the CC2310 for the first time.
If you want you can record your own personal announcement of up to 60
seconds for each OGM.
1. By Hotkey
(1)
(2)
The pre-set announcement for OGM1 is “Sorry we cannot
answer your call now, please leave your message after the beep".
If you want to record your own OGM 1 message, first ensure OGM1 is set
as the outgoing message.
Then press and hold REWIND/OGM, you will see “OGM 1” on the
display and hear a voice prompt “PLEASE RECORD NEW
ANNOUNCEMENT AFTER THE BEEP”.
After a beep tone, the display will show “RECORD”
and then you can start speaking.
When you want to end the recording, press STOP/ON/OFF.
Then the unit will playback the OGM 1 announcement automatically.
The pre-set announcement for OGM2 is
“Sorry I cannot answer your call now, please call later” .
The unit will automatically switch to OGM 2 to answer a call when the
memory is full.
If you want to record your own OGM2 message, first ensure OGM2
Repeat above sequence as OGM 1 to record the OGM 2 announcement.
2. By MENU
Alternatively, you can record OGM1 or OGM2 using the Base menu system.
Press the MENU/OK/MUTE to show "PHONEBOOK".
Press the UP button to show "TAM",
To Record your Outgoing Message (OGM)
To record OGM1
To Record OGM 2
is set as the outgoing message.
and then the MENU/OK/MUTE button to select it.