User's Manual

Binatone Help Line : 0845 345 9677 25
To Set up a three-way conference
Telephone answering machine (TAM) setup
1. By Hotkey
(1)
If the TAM is turned off, the display will show “TAM OFF”
.
12:00 9/08
TAM OFF
Switching TAM on/off
Switch TAM on to OGM 1 or OGM 2
The CC2310 answering machine can record messages from incoming callers or memos
directly at the base. Each message/memo can be up to 2 minutes long, and the total
You can switch the answering machine OFF or ON, and when it is ON, select an Answer
and Record mode or an Answer Only mode.
The Answer and Record mode allows a caller to leave a message, and is set when
OGM1 (Out Going Message 1) is selected.
The Answer Only mode, does not allow a caller to leave a message, and is set when
OGM2 (Out Going Message 2) is selected.
The answering machine is supplied with pre-set announcements for OGM1 and OGM2,
but you can record your own personal announcements if you wish.
When the answering machine is ON it will answer after a set number of rings (default 5),
but you can change the number of rings if you wish.
When the answering machine is OFF, or if the memory is full, it will answer after 15 rings,
which allows remote access if required.
recording time available for all messages/memos is about 60 minutes. If the memory
becomes full, the Message Light will flash rapidly, and you will need to delete some
messages to create space before any more messages can be recorded.