User's Manual

Binatone Help Line : 0845 345 9677 24
a three-way conference
7. At the same time, on the base, press
the MENU/OK button to see
"PHONEBOOK"
8. Press the UP button tweice to see
"REGISTRATION"
4. Press the DOWN
button to select a base number (BASE 1, 2,3 or 4)
5. Press the MENU/OK button to see
"PIN ?"
(key in 4 digits pin code -- 0000)
6. Press the MENU/OK button to confirm, and the
display will flash
"SEARCHING 1" (or 2,3,4)
9. Press the MENU/OK button to see
"SEARCHING" flash on base display
After a short delay, if the registration is successful, there will be a
confirmation beep, and the Handset display will go back to idle mode with
the new handset number shown (e.g. HS1, HS2). The base display will also
go back to idle mode.
To de-register a handset using the CC2310 base menu
With the base in idle mode:
1. Press the MENU/OK button to see
"PHONEBOOK"
2 .Press the DOWN button twice to see
"SETTINGS"
3. Press the MENU/OK button to see
"DELETE HS"
4. Press the MENU/OK button to see
" HS 1 " (or 2,3, 4)
5. Press the MENU/OK button to confirm, and the selected handset will
*
Press the PHONEBOOK/BACK button to return to the previous menu
will show "UNREGISTERED".)
To de-register a handset
You may need to do this if you need to replace a faulty handset. Call the Binatone
help
line if you need more advice.
at any time.
be de-registered. (The display on the handset that has been deleted
Press the UP or DOWN button to select the handset you want to
de-register.
Note: Handsets can also be de-registered using another cordless handset,
as described in the cordless handset user guide.
/C