User's Manual

Binatone Help Line : 0845 345 9677 17
To subscribe to this feature, you need to contact your service provider, and there may
be a charge for this service. Caller Display lets you see the phone numbers of your callers
on the display, before you answer.
The base and each handset will store its own CID list independently. Both answered and
unanswered calls are stored, up to a maximum of 20 calls. When the caller display list is
full, any new caller display entry will replace the oldest record.
If you receive a new call, the display will show the icon with the name and number
of the caller.
If there are no items on the CID list, the display will show NO CALLS.
The display may also show the following:
UNAVAILABLE – if the number of the caller is unavailable, e.g. from an international call.
WITHHELD – if the call is from someone who has withheld their number, e.g. by dialling 141
Press the MENU/OK/MUTE button, to see PHONEBOOK.
Press the DOWN button, to see "CALL LOG".
Press the MENU/OK/MUTE button, to see “RECEIVED”.
Press the MENU/OK/MUTE button, to see the most recent
record in the CID list.
Press the UP or DOWN buttons to scroll through the CID list. The NEW
icon will
*If you wish to call directly from the CID list, press the SPEAKERPHONE button or lift up
the handset to dial the number automatically.
New CID log
To review the CID list
Caller Display (CDS) / Caller ID (CID)
be displayed in the idle screen until all new calls have been viewed in the CID list.
Note: To go directly to the first record of the CID list,
Press the UP or DOWN buttons in standby mode.
The caller display information includes:
- the caller's number (up to 20 digits)
- the date and time of the call
- the caller's name (up to 12 characters) if the incoming number matches an entry
Note: it will also display the caller's name if the network sends it, but this is not normally
in the Phonebook
available in the UK.
or
or