User's Manual

Binatone Help Line : 0845 345 9677 9

Basic settings

Press the MENU/OK/MUTE button

Then press the UP or DOWN button until "SETTINGS" is displayed.

Then press the MENU/OK/MUTE to confirm.

The display will show “DELETE HS”,

Press the UP or DOWN button until "DATE & TIME" is displayed.

Then press the MENU/OK/MUTE to confirm.

The 'year' will be flashing.

Press the UP or DOWN button to set the year.

Press the MENU/OK/MUTE to confirm.

The 'month' will be flashing.



You will hear a beep and the display will show “DATE & TIME”.

Press the “PHONEBOOK” button to return to the previous menu.

To set Date and Time

Press the

or DOWN button to set the month

Press the

MENU/OK/MUTE

to confirm.

The 'date' will be flashing.

Press the UP or DOWN button to set the date

Press the MENU/OK/MUTE to confirm.

The 'hour' will be flashing.

Press the UP or DOWN button to set the hour, including the AM/PM setting

Press the MENU/OK/MUTE to confirm.

The 'minutes' will be flashing.

Press the UP or DOWN button to set the minutes.

Press the MENU/OK/MUTE to confirm.

Press the "PHONEBOOK" button to return to the previous menu.

The format for the date is YYYY-MM-DD, and the time is HH:MM in 12 hour format

Note:If you subscribe to Caller Display (see page 17) your CC2310 time and date settings

will be automatically updated by the network when you receive an incoming call.

The Caller Display service only sends the month and date, not the year, so you may

still need to set the year, as this is used to calculate the day for the answering machine 

time stamp.

If the time and date are set on the cordless handset, it will automatically be set on

the base unit, and vice-versa.