User guide

3
21
Chapter 3
Service Search
After connecting up your digital receiver, you need to search
for the available TV and radio services.
NOTE
If there are no services stored, you will be unable to access
some menu options.
3.1 Searching broadcasting services
You can use this digital receiver with both fixed antenna and
motorized antenna. When using a antenna, you have to config-
ure antenna settings according to your antenna system in the
following order:
1. Configure LNB settings. (Refer to § 3.1.1.)
2. Set the position of your desired satellites if you have
a motorized antenna. You can control the antenna in
DiSEqC 1.2 mode or USALS mode. Refer to § 3.1.2 for
DiSEqC 1.2, and refer to § 3.1.3 for USALS.
3. Perform a service search.