User guide
108 Universal Remote Control
1. Turn on the device you want to operate.
2.
Point the remote contorl at the remote senser on the de-
vice.
3.
Hold down the
OK
and device button simultaneously
for two seconds until LED lamp flashes on. For example,
if you want to operate your television with the remote
control, press the
OK and
TV buttons simultaneously.
4.
Press the
CHANNEL+
or
CHANNEL−
button until the de-
vice turns off.
If you want to find out the number which you set for your
device, do as follows:
1.
Hold down the
OK
and device button simultaneously
for two seconds. For example, if you want to know the
number which you set for your television, press the
OK
and
TV buttons simultaneously.
2.
Press the button. Then LED lamp will show the
number with blinks. For example, if the number is 3,
LED lamp will blink three times. In case of 0, LED lamp
will blink ten times.
You can reset the settings. To do that, do as follows:
1.
Hold down the
TV
and
0
buttons simultaneously for
more than five seconds.
2.
Each device button blinks three times in the following
order:
TV →
STB →
DVD →
AUX
3.
After that, all settings will be reset to the manufacturer’s
factory settings.