User guide

100 Accessing to The Digital Receiver via The Internet
NOTE
The maximum number of user connections is one. This means
that you cannot access the web server while someone else is
occupying it.
9.4 Accessing the FTP server
To Access to the FTP server, set the Installation > Network
Setting > FTP Server option to Enable.
Select the Installation > Network Setting > User Info menu. At
this time, you have to enter Personal Identification Number
(PIN). Then, set the User ID and Password options as you
desire. And select OK to save the settings. When you access
to the FTP server, you will be asked for the account that was
made with these options.