User's Manual

9Getting started
When charging, icon will scroll on the display.
BATTERY PERFORMANCE
In ideal conditions, fully charged batteries should give up to 7 hours talk time or up to 130
hours standby time on a single charge.
1
Note that new batteries do not reach their full capacity until they have been put to normal
use for several days.
To keep your batteries in the best condition, leave the handset o the base for a few hours
at a time.
Running the batteries right down at least once a week will help them last as long as
possible.
The charge capacity of the rechargeable battery will reduce with time as it wears out,
giving the handset less talk / standby time. Eventually it will need to be replaced, please
contact customer service helpline found in this user guide.
After charging your handset for the rst time, subsequent charging time is about 6–8 hours
a day. Batteries and handset may become warm during charging. This is normal.
1
All talk and standby times are approximate and depend on features selected and usage
pattern.
Setting up your IT6
Date and time
If you have subscribed to a Caller ID Service and Auto Clock is set to on (see page 27), the
date and time is set automatically for all handsets when you receive your rst call. If Auto
Clock is set to o the time and date does not set automatically.
If you do not have a Caller ID service, you can set the date and time manually.
1. Press M, scroll d to Clock/Alarm and press M.
2. Date & Time is displayed. Press M.
3. Enter the date using the format MM/DD e.g. 08/04 for 4 August and press M.
4. Enter the time using the 12 hour format HH:MM , e.g. 02:45.
5. Press u or d to change from A (am) to P (pm) and press M.
6. Press e to return to standby.
Your IT6 is now ready for use.