Owner's manual

IntelliSense
®
Manual
34
Using IntelliSense
®
Sensor Interface Module Lights
Boot load mode
If the SIM is connected to a Data Gateway or a PC running the IntelliSense
®
software when it
enters Boot load mode, the SIM will check if rmware update is available on the Gateway or
PC. While the SIM is checking for the latest rmware, Status 1 and Status 2 will be lit. After the
rmware update, the SIM will check that the installed rmware is valid. During this time, Status 1
will be lit. If the rmware fails, the check it will automatically restart the boot load process. If the
rmware fails a second time, Status 1, Status 2, and Status 3 will be lit. Go to bimba.com for the
latest rmware. When the check is successful, the SIM will enter Application mode.
Application Mode
Figure 41: Operation of Status Lights in Cylinder Monitoring Mode
Figure 42: Operation of Status Lights in Pressure/Temperature Monitoring Mode