Programmer Owner manual

Programmer Reference Manual

IL - Immediate Low Output

Compatibility: All drives

See also: IH, SO commands.

Sets an output low (closed) immediately. Use SO instead if you don’t want the output to change until a buffered command (like a

move) is complete.

Command Details:

Structure IL(Parameter #1)

Type IMMEDIATE

Usage WRITE ONLY

Non-Volatile NO

Parameter Details:

(See Appendix F: Working With Inputs and Outputs)

Examples:

Command Drive sends Notes

IL1 - Output 1 goes low immediately

IL2 - Output 2 goes low immediately

To force Outputs on main driver board when using an SE and QE drive

ILY1 - Output 1 of main driver board goes low immediately

ILY2 - Output 2 of main driver board goes low immediately