manual

9/16
Assembly page 9/16
is set on the maximum temperature (pos.”+“), in intermediate positions the surrounding temperature
is lower.
The base has an anti-tipping switch which allows the heating fan to function only when it is
positioned correctly (when it is put in place, you will hear a “click”) but it stops the appliance if it
tips.
To use the heating fan, follow these steps:
1. Insert the plug in the power socket.
2. Turn the thermostat knob clockwise to the temperature required.
3. Switch on the appliance by turning the selector knob (3) to the position of the required function.
4. If you wish the oscillation function, turn the oscillation button (2), in pos. “ ” and oscillation
(i.e., 90° rotation alternatively right and left).
5. The light (4) turns on and turns off when the appliance reaches the requested temperature; if the
thermostat is set at the maximum level, the appliance works continuously.
6. To switch off the appliance, switch off the resistance completely, let only the fan run for about 3
minutes (pos. ) to cool the resistance (this way it will last longer), then switch off the fan by
turning the knob to “0” (off). Then always remove the plug from the power socket.
Never leave the appliance connected to the socket if it is not in use, especially for long periods.
CLEANING AND MAINTENANCE
Attention: before cleaning the fan heater, turn it off, remove the plug from the outlet and wait for it
to cool.
 Periodically check that the air-intake grill is not obstructed by fuzz or threads. If the filter is dirty,
unscrew the screw (4) that hold the rear grill (5), unhook it and clean the net with a brush or water,
taking care not to damage it; then dry it perfectly and replace it in its seat. Reassemble the grill and
lock it in place by adequately tightening the screw.
 Use a soft, slightly damp cloth to clean the body; do not use metal scouring pads or abrasive
products.
 For long periods of inactivity, you must cover it and place it in a dry place; it is advisable to put it
in its original packaging to protect it from dust and humidity.
 A special tool is required to replace the electrical cord: contact an authorized service center, also
for any repairs.
 If you decide not to use the fan heater, we recommend that you make it inoperative by cutting the
power cord (but first make sure you have removed the plug from the electrical outlet), and make
those parts harmless that are dangerous when played with by children.
Do not dispose of non-biodegradable products in the environment but dispose of them in
accordance with current law. At the end of its working life, the product must not be disposed of as
urban waste. It must be taken to a special local authority differentiated waste collection centre or to a
dealer providing this service. Disposing of a household appliance separately avoids possible negative
consequences for the environment and health deriving from inappropriate disposal and enables the
constituent materials to be recovered to obtain significant savings in energy and resources. Bear in
mind that: the casing, fan and cover are made of plastic; the electrical wires are copper coated in
rubber. – The electric motor is made of iron and copper. The electrical resistance is made of ceramic
material and iron.