Owners manual

E4-WM5-Y305A00-
EINBAUANLEITUNG/
MOUNTING INSTRUCTION
created: 10.02.05 E4-WM5-Y305A00_1 page 3 of 3 latest revision: 10.6.15
Ford Motorhome F53 Chassis
Steering Stabilizer Installation Instructions
7. (See figs. 3 and 4). Install the stud on the body end of the stabilizer unit through the topside
of the ½” hole in bracket “A”. Using the washer and M12 nylock nut (provided), hand
tighten onto the installed stabilizer stud. Compress the stabilizer unit until the stud on the
rod end of the stabilizer will install through the topside of ½” hole in bracket “B”. Install
washer and M12 nylock nut on rod end stud. Hold the flat portion of the stud with a 19 mm
wrench to prevent rotation, and torque the M12 nylock nuts to 48 N/m (35 lb/ft).
8. Re-torque all U-bolts one week after installation. Torque tie rod bracket “B” U-bolts to 41
N/m (30 lb/ft) and right-hand spring U-bolt to 350 N/m (260 lb/ft).