Owners manual

E4
-
WM5
-
Y
5
34
A00
MOUNTING I
N
STRUCTION
created: 09.13.16 E4-WM5-Y534A00_1 Page 2 of 5 latest revision: 07.18.17
IMPORTANT:
PLACE CIRCLIP IN APPROPRIATE GROOVE TO ADJUST RIDE HEIGHT.
Use appropriate tools to move the circlip. Ensure that the circlip is fully seated in the groove after moving it (you should be able to
rotate it manually in the groove). Install the spring seat in the direction shown only. The circlip must fit completely in the groove
inside the spring seat (DETAIL A). Improper installation will cause permanent damage to the shock!
circlip location #1
SPRING
SEAT
CIRCLIP
DETAIL A
circlip location #3
circlip location #5
circlip location #7
circlip location #2
circlip location #4
circlip location #6
circlip location #8
circlip location #9
Circlip Location B8 6112 Typical Lift Heights**
(Driver side / Passenger side)
4x4 3.4L V6
Double Cab
4x4 3.4L V6
Extra Cab
4x4 2.7L 4cyl
Single Cab
Prerunner
3.4L V6
Double Cab
Prerunner
3.4L V6
Extra Cab
#11 / #10 2.8" Do not use Do not use Do not use Do not use
#10 / #9 2.4" 2.4" Do not use Do not use Do not use
#9 / #8 2.1" 2.1" Do not use 3.1" Do not use
#8 / #7 1.8" 1.7" 1.9" 2.8" 1.8"
#7 / #6 1.4" 1.4" 1.6" 2.5" 1.5"
#6 / #5 1.1" 1.1" 1.2" 2.1" 1.2"
#5 / #4 0.7" 0.8" 0.9" 1.8" 0.9"
#4 / #3 0.4" 0.4" 0.6" 1.5" 0.5"
#3 / #2 stock stock 0.3" 1.2" 0.2"
#2 / #1 Do not use Do not use stock 0.8" stock
circlip location #11
circlip location #10