Owners manual

E4
-
WM5
-
Y
5
54
A00
MOUNTING I
N
STRUCTION
created: 12.01.16 E4-WM5-Y554A00_2 Page 2 of 4 latest revision: 08.07.17
IMPORTANT:
PLACE CIRCLIP IN APPROPRIATE GROOVE TO ADJUST RIDE HEIGHT.
Use appropriate tools to move the circlip. Ensure that the circlip is fully seated in the groove after moving it (you should be able to
rotate it manually in the groove). Install the spring seat in the direction shown only. The circlip must fit completely in the groove
inside the spring seat (DETAIL A). Improper installation will cause permanent damage to the shock!
circlip location #1
SPRING
SEAT
CIRCLIP
DETAIL A
circlip location #3
circlip location #5
circlip location #2
circlip location #4
circlip location #6
B8 6112 Typical Lift Heights**
Circlip
Location
Frontier 4x4 V6
Crew Cab
Frontier 4x4 V6
King Cab
Frontier 4x2 V6
Crew Cab
Xterra 4x4
V6
#6 1.5" 1.8" Do not use 1.6"
#5 1.2" 1.5" Do not use 1.3"
#4 0.9" 1.2" 2.3" 1"
#3 0.6" 0.9" 2" 0.7"
#2 0.3" 0.6" 1.7" 0.4"
#1 stock 0.3" 1.4" stock