Owners manual

E4
E4E4
E4
-
--
-
WM5
WM5WM5
WM5
-
--
-
Y
YY
Y
5
55
5
10
1010
10
A00
A00A00
A00
MOUNTING I
MOUNTING IMOUNTING I
MOUNTING I
N
NN
N
STRUCTION
STRUCTION STRUCTION
STRUCTION
created: 2.4.16 E4-WM5-Y510A00_1 Page 2 of 4 latest revision: 6/20/2017
A. Remove the shock and spring unit from the vehicle following all procedures in the vehicle
manufacturer’s service manual. Note the position of the studs in the upper mount relative to the lower
mount bearing (important for reassembly).
B. Using an appropriate spring compressor, compress the coil spring until it can be rotated freely by
hand. Then disassemble the shock and spring unit.
C. Refer to Figure 1 to identify which original parts must be re-used.