Owners manual

E4
E4E4
E4
-
--
-
WM5
WM5WM5
WM5
-
--
-
Y
YY
Y
470
470470
470
A00
A00A00
A00
MOUNTING I
MOUNTING IMOUNTING I
MOUNTING I
N
NN
N
STRUCTION
STRUCTION STRUCTION
STRUCTION
created: 9/30/2016 E4-WM5-Y470A00_0 Page 2 of 5 latest revision:
A. Remove the shock and spring unit from the vehicle following all procedures in the vehicle
manufacturer’s service manual. Note the position of the studs in the upper mount relative to the lower
mount bearing (important for reassembly).
B. Using an appropriate spring compressor, compress the coil spring until it can be rotated freely by
hand. Then disassemble the shock and spring unit.
C. Refer to Figure 1 and 2 to identify which original parts must be re-used.
D. Refer to Figure 3 to identify Bilstein supplied parts.
Fig 1: ‘07-‘13 OE Top Mount Components Fig 2: 2014+ OE Top Mount Components
Fig 3: Bilstein supplied components