Owners manual

E4
-
WM5
-
Y
468A00
MOUNTING I
N
STRUCTION
created: 09.18.15 E4-WM5-Y468A00_2 Page 2 of 4 latest revision: 04.07.17
IMPORTANT:
PLACE CIRCLIP IN APPROPRIATE GROOVE TO ADJUST RIDE HEIGHT.
Use appropriate tools to move the circlip. Ensure that the circlip is fully seated in the groove after moving it (you should be able to
rotate it manually in the groove). Install the spring seat in the direction shown only. The circlip must fit completely in the groove
inside spring seat (DETAIL A). Improper installation will cause permanent damage to the shock!
circlip location #1
SPRING
SEAT
CIRCLIP
DETAIL A
circlip location #3
circlip location #5
circlip location #7
circlip location #2
circlip location #4
circlip location #6
circlip location #8
Circlip
Location
Typical Lift
Heights for
Tundra Crew Cab
4x2
V8
**
#8 2.6”
#7 2.28”
#6 1.96”
#5 1.65”
#4 1.33”
#3 0.95”
#2 0.53”
#1 stock
Circlip Location
(Driver side / Passenger side)
Typical Lift Heights for
Tundra Access Cab
4x2 V8**
#5 / #4 2.6”
#4 / #3 2.15”
#3 / #2 1.7”
#2 / #1 1.25”
Do not use circlip locations #6, #7, or #8 on Tundra Access Cab 4x2 V8
Circlip Location
(Driver side / Passenger side)
Typical Lift Heights for
Sequoia 4x2 V8**
#6 / #5 2.4"
#5 / #4 2.1"
#4 / #3 1.85"
#3 / #2 1.55"
#2 / #1 1.3"
Do not use circlip locations #7 or #8 on Sequoia 4x2 V8