Owners manual

RESERVOIR RESEAL - ASSEMBLY

STEP 3

60mm - Install new wear band on dividing piston.

STEP 5

46mm & 60mm - Install dividing piston in shock with

the wear band towards the nitrogen chamber (facing

down).

STEP 4

60mm - Install new o-ring on dividing piston. Use

white lithium grease on o-ring to aid in installation.

STEP 6

Position the dividing piston inside the nitrogen cham-

ber according to the chart below. This step is critical to

ensure the nitrogen chamber has the proper volume.

Piston Diameter Reservoir Length

Dividing Piston Depth

46mm 254mm 193mm

46mm 381mm 320mm

60mm 305mm 220mm

Oil

Dividing Piston

Dividing Piston Depth

Piston

Diameter

Reservoir Length