Owners manual

19
ROD GUIDE AND VALVING
INSTALLATION.
STEP 1
Install wiper cap on piston rod.
STEP 2
Lightly lubricate the inside of the rod guide with white lithi-
um grease and install the rod guide on the piston rod.
STEP 4
Place a dab of 271 red Loctite on rod nut and install.
Torque to 250 inch pounds.
STEP 3
Install valving discs and piston on the piston tennon in
the order that it was removed in step 3 of section: Rod
Guide Reseal, page 15.