Owners manual

PISTON ROD ASSEMBLY

REMOVAL.

STEP 1

Place shock upside down in vise and clamp on eyelet.

STEP 2

Using pick, release all gas pressure and remove

Schrader

core.

Use a buering layer between the clamp and

eyelet, such as a towel, to avoid scratching the

anodized end cap.

STEP 3

Using a 3mm socket head wrench, remove the 3

socket head screws from the rod guide.

STEP 4

Slide black wiper cap up the piston rod, revealing the

rod guide below.

IMPORTANT!

Do not collapse the piston rod once the gas

pressure is extinguished.