Owners manual

E4-WM5-Y566A00
MOUNTING INSTRUCTION
created: 03.07.17 E4-WM5-Y566A00_0 page 9 of 10 latest revision:
6. While keeping the nutsert flange firm and parallel against the frame rail, tighten the screw using a
7/16” box end wrench or socket. Turn it 2.5 rotations to set the nutsert. Tightening in ¼ turn
increments tends to work well.
7. Remove and discard the screw, washer, and flange nut. The nutsert should now be rigidly fixed in the
hole:
Figure 14
Figure 13