Owners manual

E4-WM5-Y566A00
MOUNTING INSTRUCTION
created: 03.07.17 E4-WM5-Y566A00_0 page 5 of 10 latest revision:
O. Install the shock in the original location and attach the lower mount.
P. Using the supplied stem mounting hardware kit, install the upper mount. Refer to Figure 6 for the
proper order of installation of the stem hardware. If a chassis hoist has been used, be sure to lower
the vehicle such that its full weight is on the suspension prior to fully tightening the fasteners.
Q. Orient the hose fitting toward the rear of the vehicle as shown in Figure 7.
M12 locknut
lower
bushing
lower
washer
stem
upper
bushing
shock tower
upper
washer
Figure 6
Figure 7