Manualshelf

Owners manual

ManualsBrandsBilstein Shocks ManualsAutomotive25-227611 B8 5160 Shock Absorber Fits 03-18 4Runner FJ Cruiser
12345678910
E4-WM5-Y566A00
MOUNTING INSTRUCTION
created: 03.07.17 E4-WM5-Y566A00_0 page 3 of 10 latest revision:
D. Place the stud into the lower round hole on the back side of the bracket. Install the ¼” split washer
over the stud. Install the ¼” nut on to the stud but only engage one or two threads for now. A non-
permanent thread locking compound may be used on the threads in addition to the split washer for
additional durability. This is depicted in Figure 3.
E. Figure 4 shows the vehicle frame rail on the driver side toward the front of the wheel well. There are
two existing holes in the frame rail that will be used to secure the reservoir bracket. The upper hole
has an M8x1.25 thread, the lower hole is oval and has no threads (for vehicles not equipped with the
M8x1.25 thread in the upper mounting hole, refer to the supplemental mounting instructions, page 7).
oval hole
Figure 3
Figure 4