Owners manual

E4
-
WM5
-
Y
576A00
MOUNTING I
N
STRUCTION
created: 06.13.17 E4-WM5-Y576A00_0 Page 3 of 6 latest revision:
2. Install axle bracket following all procedures in the vehicle manufacturer’s service manual and as shown below:
3. Install the B8 5100 Bilstein Shock Absorber in the location shown on page 4 and attach the front and rear
mounts following all procedures in the vehicle manufacturer’s service manual.
4. If a chassis hoist has been used, be sure to lower the vehicle such that its full weight is on the suspension
prior to fully tightening the fasteners. This completes the installation.
4x
2 Axle bracket
4x
4
Axle bracket
Powerwagon
Axle bracket
Bracket
to axle
bolts
Damper to
frame bolt +
lock nut
Damper to
axle bracket
bolt + lock
nut